TRATOS MTO® – FU NYHSSYCY
TRATOS MTO® – FU N3GHSSYCY

TRATOS MTO® – FU NYHSSYCY – PVC 3.6/6 kV
TRATOS MTO® – FU N3GHSSYCY – Rubber 3.6/6 kV to 12/20 kV

As feeder cable for power supply of shiftable MV equipment e .g. explosion-proof transformers, for underground mining applications as well as for tunnel sites. This cable type is available in two different material constructions. TRATOS MTO-FU NYHSSYCY – PVC 3,6/6kv and TRATOS MTO-FU N3GHSSYCY – rubber 3,6/6kv and 12720kv.

The conductor is a finely stranded copper conductor, not tinned, class 5 (refer to DIN VDE 0295). The insulation refers to DIN VDE 0207, part 4 and part 20, which is a PVC-based thermoplastic compound type YI5. The EPR-based insulation compound type 3Gi3.

The protective-earth conductor is laid concentrically as an outer semiconductive layer. The electrical field control via copper wire braiding is individually laid up concentrically as an outer semiconductive layer. The core arrangement is three main cores laid up, each with one control core in the outer interstices.

Filler compound is EPR. The intermediate sheath is a PVC-based plastic compound type YM5. The anti-torsional braid is made of galvanised steel wires. The outer sheath is a PVC-based thermoplastic type YM5 in red colour. The cable is marked as follows: Year of manufacture, VDE, TRATOS MTO-FU NYHSSYCY, cross-section, and rated voltage.

Cables are produced to the following standards: DIN VDE 0250 part 212 for the PVC version and DIN VDE 0250 part 605 for the rubber version.

STANDARDS

• DIN EN 60228 VDE 0295
• DIN VDE 0207, part 20
• DIN VDE 02027, part 21
• DIN EN 60811-404 VDE 0473-811-404
• DIN EN 60332-1-2 VDE 0482-332-1-2
• DIN EN 50628 VDE 0118-10 
• DIN VDE 0298-4 VDE 0298-4