TRATOSWIND® – ES3 – (N)TSCGEHXOEU

MEDIUM VOLTAGE POWER CABLES for wind turbine farms (– (N) TSCGEHXOEU VDE 0250 p. 813 (as applicable) & HD 620 S1 p.9

Special Cables / Renewable Energy Cables

TRATOSWIND® – ES3

U°/U= 3.6/6.0 KV TO 20/35 KV

TratosWind cable is intended for use in wind turbines with high mechanical effort in a temperature range from -40°C to +90°C. TratosWind (N)TSCGEHXOEU cable can be installed free moveable, free-hanging, or fixed. For free-hanging operation, the cable is twistable. The cable is used for economical transmission of large energy rates with medium voltage. In other respects, DIN VDE 0250 applies.

A wind turbine cable is essential for carrying electricity from the top of the turbine down to its base, where the power is distributed. Built to handle tough conditions like temperature changes, strong winds, and moisture, this cable ensures a steady and reliable flow of electricity. Its protective coating helps prevent electrical issues and keeps the system safe. Choosing the right wind turbine cable is key to making wind energy systems efficient and long-lasting.

Contact us:

Tel: +44 20 3148 5178

e-mail: sales@tratosgroup.com

Please don’t hesitate to contact us if you need additional information about our products.

Catalogues

 Tratos Renewable

CONSTRUCTION

  • Conductor: Electrolytic copper, tinned, finely stranded, Class 5 according to DIN VDE 0295 / IEC 60228
  • Insulation: Halogenfree, heat resistant insulation based on EPR
  • Electrical field control: Inner and outer layer of semiconductive, halogenfree rubber
  • Core identification: Natural colouring with black semiconductive rubber
  • Sheath: Halogenfree special rubber compound. Resistant to heat, cold, UV, Ozone and mineral oil. Colour black
  • Marking: TRATOS WIND (N)TSCGEHXOEU (number of cores) x (crosssection) (voltage) + VDE

Standards

Technical Specifications

  • Medium voltage power cables suitable for WIND TURBINES with high mechanical effort in a temperature range from -40°C to +90°C.
  • Tensile load Up to 20 N/sqmm copper cross section
  • Torsional stresses +/-100°/m
  • Resistance to mineral oil according to DIN EN 60332-2-1
  • Resistance to ozone according to DIN VDE 0282 PART 2, HD 22.2 TEST TYPE B
  • UV resistance according ISO 4982-2 Method A

Contact us

Please, don’t hesitate to contact us for additional information on our company or our products.

Contact us

Related Case Studies

Related News