The product is applied so that the inner part (laminated) is directly in contact with the turns of the cables. The correct application of the product will be carried when the cable on the drum has an homogeneous winding. In order to assure the complete protection of cables, the product has to be overlapped about 4 cm before the closing of the drum. The product will be fixed to the drum with an iron strap system or equivalent, that assures the firmness the closure and avoids the displacement of the same during the transport or the manipulation of the drum.
The product will have a width that changes in function of the width of the drum. The product must completely cover all the turns of the cable, including the external end of the same, so that comforts between the product and the wings of the spool do not exist Packaging recommendations NEW Tratos Packaging Disclaimer TRATOS CAVI S.p.a reserves the right to make at any time without previous notice, variations on products described in this catalogue. Moreover TRATOS CAVI S.p.a shall not have any responsibility for improper use of it’s electrical cables.