CABLE OPTICAL FIBRE 200 - BLOWN - EXTERNAL - SINGLE MODE NON-PRESSURISED
This range of fibre cables is specifically designed for installation into sub-duct by the use of air blown techniques although in some circumstances the cables are suitable for installation over short distances by the use of direct pulling techniques with a rope or glass fibre pulling rod. These cables are of loose tube construction containing 12 to 288 single mode fibres constructed in units of 12 colour coded fibres within each water blocked tube. The required number of tubes plus dummy fillers where required are assembled helically in one or two layers around a non-metallic central strength member, the design being specially chosen to ensure that the cable is neutrally balanced along its central axis. A black PVC insulated copper conductor is included in the unit assembly to provide an easy method of detecting the cable once installed. The interstices contain water blocking before the application of a water blocking binder tape and black polyethylene sheath, two rip cords are inserted under the sheath to aid stripping and termination of the cable. The robust polyethylene sheath used by Tratos ensures outstanding pliability and protection.
Tratos has developed this cable to have the optimum balance of properties, toughness to withstand blowing or pulling into sub-ducts combined with a smooth, low coefficient of friction, surface, to ease installation and prevent jamming.
The Step Index single-mode optical fibre (SMF) fibres used to manufacture these cables for BT meet or exceed the requirements for both Category 1 (and if required Category 2 fibres) as specified in CW 1505 for systems operating in the wavelength range of 1260nm to 1625nm.
These cables meet or exceed the requirements of CW 1804,
All of the polymeric materials used in the construction of cables for BT meet or exceed the requirements of BT Specification CW1500-7 and are RoSH compliant
Dry tubes or additional strength members can be supplied on request.
- CW 1804 Design guide
- CW 1205
- CW 1402
- CW 1500-2
- CW 1500-7
- CW 1505
- CW 2000
- LN 650
- CN14087 Sheet 3
EN / BS EN:
- BS EN 60794-1-2
- BS EN 50290-2-24
ApplicationThis range of cables is designed for installation into sub-duct by the use of air blown techniques. In some circumstances the cables may be installed short distances by the use of direct pulling techniques with a rope or glass fibre pulling rod.
- Central Dielectric Support FRP
- Step index single mode fibre
- Jelly filled loose tube
- Cable detection element
- WB Wrapping
- Rip Cords
- HD PE Outer sheath
- These cables are for use in transmission systems operating over the wavelength range 1260nm to 1650nm.
- Operating temperatures between -20°C and +60°C