CABLE OPTICAL FIBRE 45 - INTERNAL - MULTI MODE (50/125µm)
This range of non-metallic, loose tube construction LFH (Limited Fire Hazard) optical fibre cables containing 12 and 24 multimode (50/125μm) optical fibres is specifically designed for use in conventional cable structures and blown fibre bundles within buildings where good Reaction to Fire Performance is required.
These cables are of loose tube construction containing 12 multimode
(50/125μm) fibres colour coded within each dry tube. One or two tubes plus dummy fillers where required are assembled helically around a non-metallic central strength member, the design parameters being specially chosen to ensure that the cable is neutrally balanced along its central axis. The assembly is wrapped in a tape and extruded Halogen free flame retardant thermoplastic material coloured aqua (other colours on request). Two rip cords are inserted under the sheath to aid stripping and terminating the cables. The robust LSZH sheath used by Tratos ensures outstanding pliability and protection.
Tratos have developed this cable to have the optimum balance of properties, fire performance, toughness to withstand blowing or pulling during installation combined with a smooth, low coefficient of friction, surface, allowing a significant reduction in installation time due to pliability and ease of handling when placing or dressing the cable into position.
The transmission application for these 50µm core diameter, multimode optical fibres cables are for systems operating with nominal wavelengths of 850nm and 1300nm optimised for operation in the 1300nm wavelength region and provide a specified transmission capability in the 850nm wavelength region.
The Multi Mode fibre meets or exceeds the requirements of OM3 (to ISO 11801/ITU-T G651).
Tratos use Lucent OFS and Prysmian fibres to manufacture the Optical Fibre Cables supplied to BT.
These cables meet or exceed the requirements of CW 1908.
All of the polymeric materials used in the construction of cables for BT are RoSH compliant and meet or exceed the requirements of BT Specification CW1500-7 and MDHS 14/3.
Cables produced by Tratos meet a minimum CPR reaction to fire performance of Cca s1b d1 a2.
Guidance for the installation of telecommunications cabling is contained in BS 6701 Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance.
- CW 1908 Design guide
- CW 1205
- CW 1404
- CW 1500-2
- CW 1500-7
- CW 2000
- MDHS 14/3
EN / BS EN:
- BS EN 60794-1-2
- BS EN 50290-2-27
- BS EN 50575
- ISO 11801 OM3 (to ISO 11801/ITU-T G651).
ApplicationSpecifically designed for use in conventional cable structures and blown fibre bundles within buildings where good Reaction to Fire Performance is required.
- Central Dielectric Support FRP
- Graded Index Multi Mode (50/125µm) OM3 Fibre
- Dry loose tube
- Extruded fillers
- Wrapping tape
- Rip Cords
- LSZH Outer sheath
- Graded Index Multi Mode fibre OM3 (to ISO 11801/ITU-T G651).
- These cables are for use in transmission systems operating over the wavelength range 1260nm to 1650nm.
- Operating temperatures between -20°C and +60°C