TRATOS® MINI BREAKOUT
Tratos introduces a new family of optical cables for last-mile broadband network cabling from the broadband hub to the individual customer’s premises. Very compact to fit into small conduits and building floor access points. Extremely flexible small diameter cables in combination with miniaturised cable accessories The MINI Breakout cable is composed by 4, 12 or 24 PICO Breakout cables covered with an overall LSZH outer sheath.
Last-mile network fibre optics hold the potential for significantly faster response to the demand for development of broadband connectivity.
The deployment of FTTH raises many challenges since building infrastructures can and do vary however in its FTTH (Fibre to the Home) range, Tratos has developed a super-simple solution for different installation conditions and systems.
Tratos bespoke MINI Breakout and TRATO PICO Breakout cables are produced using advanced-performance materials from OFS, a leading designer, manufacturer and supplier of innovative fibre optic network solutions.
The products retain all the performance benefits of OFS’ AllWave Zero Water Peak (ZWP) Fibre, the first fibre to eliminate the water peak defect found in conventional fibre, due to OFS’ patented ZWP fibre manufacturing process, which eliminates hydrogen-aging defects.
The ultra-low fibre Polarisation Mode Dispersion (PMD) enables speed and distance upgrades and the cables meet and exceeds both ITU-T G.657-A2 and G.652.D recommendations and International Standard IEC 60793-2-50 specifications.
Tratos MINI Breakout cables are flame retardant, have low smoke and toxic gas emission meeting the requirements of classification Cca of the CPD for cables installed in buildings using metal free designs, rodent resistant versions are also available.
Tratos PICO Breakout cables can be easily blown or pulled through existing conduits or ducts without damage.
Tratos MINI Breakout cables are available in Internal and Reinforced Outdoor versions
- IEC 60332-1-2
- IEC 60754-1 & 2
- IEC 60793-2-50
- EN 50265
- EN 50575
- ITU-T G657A2
Tel: +44 20 3148 5178
Please don’t hesitate to contact us if you need additional information about our products.
ApplicationDeveloped for the wiring of single and multi-dwelling family units, with fiber optic cables and connectivity inside the building, from the outside plant cable termination to the customer's interface. For internal use connecting individual flats where the cable runs vertically from the bottom to the top of the building, and one or more of the cables in the bundle can be branched off at any point and connected to the end user.
CONSTRUCTIONIndividual PICO Breakout cables ITU-T G657A2 fibre Tight acrylate coating Strength member LSZH sheath Colour coded Mini Breakout Cables 4, 12 or 24 PICO Breakout cables laid up LSZH outer sheath Dimensions
- Outer sheath nominal thickness - 4, 12, 24 fibres: 1,0mm
- Nominal outer diameter 4 fibres: 4,0mm
- Nominal outer diameter 12 fibres: 6,0mm
- Nominal outer diameter 24 fibres: 8,0mm
- Nominal cable weight 4 fibres: 40kg/km
- Nominal cable weight 12 fibres: 50kg/km
- Nominal cable weight 24 fibres: 75kg/km
Please, don’t hesitate to contact us for additional information on our company or our products.
Related Case Studies
Round table on “Using innovation and standardization toward the decarbonisation of the transport sector”
Together with AENOR in protecting the environment
Tratos has made possible the first use of Bornewables™ in the energy industry
“Egidio Capaccini” Award - 2022 edition
What is Tratos premium price?
Moving to fully recognised certification body BSI to be global
Tratos’ CEO joined the world leaders at COP26 to tackle climate change
Tratos to award the “Egidio Capaccini” Prize to deserving students of its local community