TRATOS® PAS 5308 Part 1/Type 1 – Unarmoured Construction

TRATOS® PAS 5308 Part 1/Type 1 – Unarmoured Construction

Publicly Available Specification PAS 5308-1 replaces BS 5308-1 and provides additional aspects not covered in the European standard for control and instrumentation cables, BS EN 50288-7. As the actual manufacturer of these cables, not simply a distributor, Tratos has total control of the design, quality and manufacturing process from the purchase of the raw materials through to final testing and despatch to our customers. Having control of the manufacturing process Tratos can ensure compatibility with most makes and types of glands. Tratos manufacture a complete range of control and instrumentation cables for industrial applications. Tratos control and instrumentation cables are available with either Class 1, Class 2 or, to aid installation and allow repeated removal of meters for calibration, Class 5 conductors. Tratos PAS 5308-1 cables are available with both standard insulation thickness and enhanced insulation thickness with individual or collective screens to confine the electric field and to limit the external electrical influences. PAS 5308 Specification designate cables according to their construction, type 1 cables are unarmoured, type 2 cables have a single wire armour. Both types of cable have a PVC outer sheath, however recognising the contribution of cables to a fire hazard Tratos manufacture an equivalent range of cables with low smoke zero halogens (LSZH) sheath.

Electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in buildings and other civil engineering construction works are covered by the Construction Products Regulation No. 305/2011 and subject to performance requirements on reaction to fire.

Tratos control and instrumentation cables are available as class Cca (BS EN 50575) as standard, higher classifications are available on request

The ranges of control and instrumentation cables have been rationalised to preclude certain cable types and conductor sizes in accordance with current industry practice.

STANDARDS

• PAS 5038-1 – Design
• BS EN 60288 class 1, class 2 or class 5 – Conductor
• BS EN 50290-2-23 or BS EN 50290-2-23 – Insulation
• BS EN 50290-2-22 or BS EN 50290-2-27 – Sheath

Where CPR applies

• BS EN 50575
• CPR BS EN 13501-6

Where CPR does not apply

• IEC 60332-1 – Flame Retardant
• IEC60332-3-22 – Flame retardant
• IEC60754-1,2 – Halogen Free (on request)
• IEC 61034-1,2 – Low Smoke (on request)