TRATOSFLEX MTO®-MSR

Control, signalling and bus cables with the necessary transmission characteristics used for electric and electronic equipment, such as for measured value and process data processing and automation units in open-cast mining applications. Suitable for laying alongside conveyor belts and on material handling equipment.

The conductor is finely stranded copper class5 refer to DIN VDE 0295. The insulation basic material is Polyethylene (PE) compound type 2Y11 refer to DIN VDE 0207 part 20. The cores are laid-up in pairs in layers with a continuous serving of non-hygroscopic material over the conductor assembly. The inner sheath basic material (special compound type) CM, compound typeEM2 refer to DIN VDE 0207, part 21. The screen braiding is made of tinned copper wires between the inner and outer sheath. The outer sheath basic material (special compound type) CM is EM2 refer to DIN VDE 0207, part 21. Cores are black with white digits printed thereon. Marking as follows: TRATOSFLEX MTO-MSR 2YSLGCGÖU number of cores, cross-section and rated voltage.

Two different temperature types are available. Fully flexible in operation at -30℃ to +80℃. The low-temperature version “K” is suitable for -60℃ to +60℃. The short circuit temperature of the conductor is 150℃. Tensile load up to 15n/mm. Resistance to oil given to DIN VDE 0473, part 811-2-1, para. 10.

Behaviour in case of fire given to DIN VDE 0482, part 265-2-1, para. 10.

The cable is useable unrestricted outdoors and indoors, resistant to ozone and moisture.

STANDARDS

• DIN EN 60228 VDE 0295
• DIN VDE 0207, part 20
• DIN VDE 02027, part 21
• DIN EN 60811-404 VDE 0473-811-404
• DIN EN 60332-1-2 VDE 0482-332-1-2