Tratos XLPE/LS0H – (F)(U)(R)TE4X(O)HM1

INSTRUMENTATION CABLES BASED ON PAS 5308

Special Cables / Instrumentation Cables
Special Cables / Oil & Gas Cables / Petrochemical Cables

300/500 V – Based on Part 1 Type 1 Collective screen. Unarmoured fire performance cable for indoor installations in the petroleum industry, chemical and petrochemical plants. Used for control and instrumentation as well as for data & voice transmission. Also used for the interconnection of electrical equipment and instruments, particularly in and around process plants. Used where limited circuit integrity in the event of a fire is required.

STANDARDS

  • Based PAS 5308-1 Design guideline
  • IEC 60332-1 Flame retardant
  • IEC 60332-3C Fire retardant on bunched cables (if required)
  • IEC 60331 Circuit integrity test
  • IEC 60754 Halogen free properties
  • IEC 61034 Low smoke emission

Contact us:

Tel: +44 20 3148 5178

e-mail: sales@tratosgroup.com

Please don’t hesitate to contact us if you need additional information about our products.

Catalogues

 Instrumentation Cables

 Tratos Petrochemical

CONSTRUCTION

  • Conductor: Plain annealed copper wire conductors to BS EN 60228 cl.1, cl.2 or cl.5
  • Fire barrier: Mica-glass tape
  • Insulation: XLPE
  • Cores twisted into pairs
  • Cabling of pairs: in concentric layers
  • Tape: Polyester binder tape
  • Collective screen: Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
  • Outer sheath: LSOH
  • Marking: (PAS 5308-1) + (300/500 V) + (TRATOS) + (Year of Manufacture) + (Batch Number) + (Metre Mark)

Standards

Contact us

Please, don’t hesitate to contact us for additional information on our company or our products.

Contact us

Related Case Studies

Other News