Tratos PE/PVC or XLPE/PVC or XLPE/LS0H – RE4(X)HOHR(M1)

INSTRUMENTATION CABLES BASED ON EN 50288-7

Special Cables / Instrumentation Cables
Special Cables / Oil & Gas Cables / Petrochemical Cables

300V or 500V – Unarmoured multi-element metallic instrumentation cables for indoor use in analogue and digital communication and control in and around process plants where higher levels of screening than provided by collective screen is required. Important Note: These cables are not intended for direct connection to mains electricity supply or other low impedance sources.

STANDARDS

  • EN 50288-7 Design guidelines
  • EN 50290-2 Specification for insulation and sheath material
  • IEC 60332-1 Flame retardant
  • IEC 60332-3A Fire retardant on bunched cables (if required)
  • IEC 60754 Halogen free properties (only for LS0H)
  • IEC 61034 Low smoke emission (only for LS0H)

Contact us:

Tel: +44 20 3148 5178

e-mail: sales@tratosgroup.com

Please don’t hesitate to contact us if you need additional information about our products.

Catalogues

 Instrumentation Cables

 Tratos Petrochemical

CONSTRUCTION

  • Conductor: annealed copper wires according to cl. 2
  • Insulation: polyethene or XLPE
  • Pairs: twisted
  • Identification pairs: see table 11 & 12 on page 12
  • Individual screen: aluminium/polyester tape 0.024 mm in electrical contact with tinned annealed copper wires of a total section of 0.5mm2 polyester tape 0.023 mm
  • Assembly: concentric layers
  • Overall screen: aluminium/polyester tape 0.024 mm in electrical contact with tinned annealed copper wires of a total section of 0.5mm2 polyester tape 0.023 mm
  • Outer sheath: PVC or LSOH
  • Marking: (EN 50288-7) + (Voltage grade) + (TRATOS) + (Year of Manufacture) + (Batch Number) + (Metre Mark)

Standards

Contact us

Please, don’t hesitate to contact us for additional information on our company or our products.

Contact us

Related Case Studies

Other News